RioRand 150W DC-DC Boost Power Converter 10-32V 12V to 15V/19V/24V Car Laptop Power Supply

  • Product Code: r2016
  • Availability: In Stock
  • Overview
  • Powered by RioRand Advanced Technology
  • $16.99


Features:
Module Properties: Non-isolated step-up module (BOOST)
Input voltage :10-32V DC
Output voltage: 12-35V DC (continuously adjustable)
Output Current: 10A (MAX)
Input Current: 16A (MAX) (Please enhance heat-sinking over 10A)
Output power: 100W MAX(natural cooling), 150W MAX (enhancing heat-sinking)
Conversion efficiency: 94% (Input 16V Output 19V 2.5A when measured) (for reference only)V Output Ripple: 2% (MAX) 20M Bandwidth
Operating temperature: Industrial grade (-40 °c to +85 °c) (when environment temperature exceeds 40 °c, please reduce the power,or enhance heat-sinking )
Full load temperature: 45 °c
No-load current: Typical 25mA
Load regulation: + / - 0.5%
Voltage regulation: + / - 0.5%
Dynamic response speed: 5% 200uS
Short circuit protection: None (Please enter install fuse or protective circuit)
Dimension:65 x 47 x 23.5mm

Note:
When the length of lead wire less than 1 meter,it is not less than 1.5 mm². If it is more than 1 m , it is recommended to use 2.5 to 4 mm² lead wire.
When the module in the high-power(up to 70W) , high temperature, or with a case , please install the fan.
Please be sure that the temperature of the module heatsink is not exceed 80 degrees.
The input can not be reversed, and the output can not be shorted.
The discharge voltage of 12V battery can not be lower than 10.5V, and it can not be lower than 2.7V in serial lithium battery

Applications:
DIY an adjustable output vehicle power supply.
Boost charger
Power for your electronic devices
Solar battery charger for electric vehicles

Package Include:
1x DC Boost Converter